"No-drill" installation
NO-Drill Installation Hydrofoils were pioneered and patented by us! The goal was to create hydrofoils that could be installed without holes being drilled into the engine. The NO-Drill Installation method differs depending on which StingRay Hydrofoil model you choose, but each method requires zero drilling and allows for installation in under 10 minutes!
For the best, most robust installation, we recommend utilizing the optional-drill installation that has been enabled for each of these NO-Drill Hydrofoils. The optional-drill method requires half as many drilled holes as competition (2) and provides the best security for your hydrofoil!
Check out the various NO-Drill Installation models and their performance ratings below:
Hyperfoil & stinger
Utilizes 2 set screws that pinch the anti-cavitation plate from each side.
Requires 0 drilled holes!
Designed for top-end speed and professional bass boats.
Rating (1=least, 10=most):
Lift = 4
Speed = 10
Stabilization = 4
starfire
Utilizes 2 set screws that pinch the anti-cavitation plate from each side.
Requires 0 drilled holes!
Designed for top-end speed and performance upgrades for all boats.
Ratings (1=least, 10=most):
Lift = 7
Speed = 8
Stabilization = 6
xriii
Utilizes sacrificial anode to pinch the unit onto the anti-cavitation plate.
Requires 0 drilled holes!
Designed for maximum lift on heavier boats and pontoons.
Ratings (1=least, 10=most):
Lift = 10
Speed = 4
Stabilization = 8